Cambridge, MA
GVD's research and development center is located at the heart of Cambridge MA: a high-tech, bio-tech, and chem-tech nexus. The site hosts administrative functions, research & development, process design and systems engineering staff, and is also a coating production facility.
Address: 45 Spinelli Place, Cambridge, MA 02138
Phone: (617) 661-0060
Fax: (617) 812-0553
To contact us regarding a potential coating application, please e-mail inquiries@gvdcorp.com.
Directions to our facility
- Exiting the Airport, take the Ted Williams Tunnel toward Route 90 West (the Mass Pike)
- Take Route 90 West until Exit 18/Cambridge
- Stay right after the toll booth
- At the second light, take a left on Storrow Drive West to Fresh Pond Parkway (Rt 16) (do not cross over the Charles River)
- Follow directions from Downtown Boston
- Take Storrow Drive West to Fresh Pond Parkway (Route 16). After you pass the exit for Harvard Square on Storrow Drive, look for "Arlington/Cambridge/Fresh Pond Parkway" sign. Bear right onto Fresh Pond Parkway.
- Cross over the Charles River following the road around to the right. You will come to a set of lights and Mt. Auburn Hospital will be in front of you on the right.
- Continue straight through two more sets of lights on Route 16 (stay right at fork) heading toward Cambridge. This is a residential area and the road turns often. Fresh Pond will be on your left, and a gas station on the right. You will come to a rotary. Bear left around the rotary (3/4 around).
- You will come to a second rotary approx. 500 yards from the first. Stay left, and then take the second rotary exit onto Concord Avenue.
- Follow Concord Avenue approx. 0.4 miles (past the Burger King)
- Take a right onto Spinelli Place.
- GVD is the last building on the left at the end of Spinelli Place
- Follow Route 2 all the way to the end (approximately 5 minutes from Route 128/I95). You will see signs for Route 16 West (Arlington/Cambridge). Alewife T station will be on your right.
- Follow Route 2 East / Route 16 West, to the right, up over the bridge and down to the rotary.
- Bear right off the rotary and follow signs for Belmont Center. This is Concord Avenue.
- Follow Concord Ave. approx. 0.4 miles (past the Burger King) and take a right into Spinelli Place.
- GVD is the last building on the left at the end of Spinelli Place
- Take the Red Line on the "T" to Harvard Square station.
- In Harvard Sq. station, take bus #74 or #78 for Belmont Center (DO NOT take bus #74-1)
- This bus stops on Concord Avenue at Spinelli Place.
- GVD is the last building on the left at the end of Spinelli Place
Greenville, SC
GVD's manufacturing center is located in sunny Greenville, SC. The site houses our manufacturing and coating services functions.
Aerial view of Boston and Cambridge, MA
The Reedy River in downtown Greenville, SC
